Rover V8 4.0 + 4.6 Big End/Conrod Bearings

Included in this listing is a set of big end bearings for a 4.0 or 4.6 litre Rover V8 engines. The bearings supplied here are the same the we at RPI use in our own engines, and are available in standard or +10 thou oversize. We are able to supple +20thou oversize as well, however these are request only as we don't usually keep them in stock.

Rover V8 big end bearings.
Standard size for 4.6 and 4.0 conrods
As used by us at RPi - quality assured
Oversized bearings available.

Big end bolts should always be replaced
Take care when installing new shells to ensure the surfaces aren't damaged on installation
We recommend using graphogen grease on the bearings when installing to protect them on the first start
Fitting advice from RPi is available if required

Brand	RPi
Condition	New
Weight	0.9kg

Rover V8 4.0 + 4.6 Big End/Conrod Bearings

Product information

Technical Specifications

RPi Advice