RPi rebuilt 4.6 Short Engine - Suitable for P38, Discovery 2 and more (built to order)

Out of stock

Product information

Included in this listing is a fully remanufactured RPi 4.6 liter cross bolted short engine, built to order as required by our engine builder of over 25 years and 2000 engines. For the price here, you will receive a fully pressure tested, top hat lined block with crank, rods and pistons all assembled and fitted as shown, ready for a cam, covers, ancillaries and other parts to be bolted on.

Technical Specifications

  • Fully pressure tested, top hat lined block
  • Block, crank, rods, pistons and core plugs assembled by Holly, our engine builder of over 25 years
  • RPi are able to build engines of all specifications
  • Cylinder heads, fuelling and ignition systems all available from us

Why Choose an RPi Engine?

Our blocks
All of the blocks we use go through the same process to ensure they aren't cracked. First, we chemically clean the blocks to ensure that all the oil and waterways are clear. Then, the liners are removed, and the block pressure tested at beyond operating temperature. If a block fails this test, we simply don't use it, and our reliability record speaks for itself with many thousands of engines built and still running.
Our components
We use the best quality components in all our engines, using the experience we've gained over the last 30 years of Rover V8 engines. For example, we only use Piper cams, Cloyes, kent or Genuine Land Rover timing chain sets, OEM tappets and much more
Our experience
RPi have been working on Rover V8 engines and the vehicles they power for the last 30 years, and in that time Holly, our only engine builder, has built over 2000 Rover V8 engines of all specifications.

RPi Advice

  • We are able to supply engines of many differing sizes and specifications, please contact us for more details
  • We can also offer unlimited support with advice over email and telephone, or fitting here at our workshop for any Rover V8 components, from servicing to full engine replacements
  • It's always best to use a good quality camshaft to ensure long life. We will only use Piper or Kent
  • Valvoline VR1 20w/50 is the only oil we use and recommend for the Rover V8 and is alavailable from us by request.
  • Good quality fuelling and ignition systems of the correct specifications are essential, and RPi are more than happy to help you make your selection.

Brand RPi Engineering
Condition Refurbished
Weight 150kg